Commande pour décrocher : ATA
Exemple de dialogue capturé :
Envoi de la commande [ATA] (alors qu’aucun appel n’est en cours de réception)
ATA
ERROR
Envoi de la commande [ATA] (lorsque la carte est appelée)
RING
RING
ATA
OKPour raccrocher : ATH
http://www.thehackademy.net/madchat/reseau/Commande%20AT.htm
2.19 ATS0 Set number of rings before automatically answering the call
Read command
ATS0?
Response
<n> OK
Write command
ATS0=<n>
This parameter setting determines the number of rings before automatic answering.
Response
OK
Parameter
<n> 000 automatic answering is disabled
001-255 enable automatic answering on the specified ring
number
Reference
V.25ter
Note
• This command works only in data and fax mode.
• The TC35 supports the registers S0 – S29. A user can change
S0,S3,S4,S5,S6,S7,S8,S10 and S18 via the related ATSn commands.
The other registers are read-only and for internal usage only!
commandAT+CHUP Hang up call
Test command
AT+CHUP=?
Response
OK
Execute command
AT+CHUP
Cancel all active and held calls.
Response
OK/ERROR
http://www.dataip.co.uk/Reference/ATCommands.php
http://www.zoltrix.com/support_html/modem/USEMODEM.HTM#Answering a Call
AndroLogiciels 
Votre commentaire